Synaccess Networks NP-0801DTM - Manual (Page 92)

3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide 92
Notes
„
Reference: 3GPP TS 27.007
Ringer Sound Level +CRSL
Set command selects the incoming call ringer sound level of the device.
Read command reports the current setting of the call ringer in the format:
+CRSL:
Test command reports supported values as compound value.
+CRSL: (0‐4)
Syntax
Command Command type
AT+CRSL= Set
AT+CRSL? Read
AT+CRSL=? Test
Parameters and Values
Ringer sound level
0 Off
1 Low
2 Middle
3 High
4 Progressive
Notes
„
Reference: 3GPP TS 27.007.
Loudspeaker Volume Level +CLVL
Set command selects the volume of the internal loudspeaker audio output of the device.
Read command reports the current setting of the loudspeaker volume in the format:
+CLVL:
Test command reports supported values range in the format:
+CLVL: (0‐max)
Syntax
Command Command type
AT+CLVL= Set
AT+CLVL? Read
AT+CLVL=? Test