Synaccess Networks NP-0801DTM - Manual (Page 211)

CUSTOM AT COMMANDS
211 HSPA+ AT Commands Reference Guide
Write Message to Memory #CMGW
For both PDU mode and text mode, Execute command writes a new message in the memory storage.
Test command returns the OK result code.
Syntax
Command Command type
AT#CMGW=, Execute, PDU mode
AT#CMGW=, Execute, Text mode
AT#CMGW=? Test
Parameters and Values for PDU Mode
length in bytes of the PDU to be written.
7‐164
PDU in hexadecimal format (each octet of the PDU is given as two IRA character
long hexadecimal number) and given in one line.
If message is successfully written in the memory, then the result is sent in the
format:
#CMGW:
where:
‐ message location index in the memory .
If message storing fails for some reason, an error code is reported.
Parameters and Values for Text Mode
String type, destination address represented in the currently selected character
set. See +CSCS.
7‐164
Text to write. Enclose entered text between double quotes. Format text as
follows:
„
If current indicates that GSM03.38 default alphabet is used
and current indicates that 3GPP TS 23.040 TP‐User‐Data‐
Header‐Indication is not set, then ME/TA converts the entered
text into GSM alphabet, according to GSM 27.005, Annex A. For
more information about and , see +CSMP.
„
If current indicates that 8‐bit or UCS2 data coding scheme is
used or current indicates that 3GPP TS 23.040 TP‐User‐Data‐
Header‐Indication is set. For more information about and
, see +CSMP.
Entered text consists of two IRA character long hexadecimal
numbers which ME/TA converts into 8‐bit octet. For example
the ‘asterisk’ is entered as 2A (IRA50 and IRA65) and this is
converted to an octet with integer value 0x2A.
If message is successfully written in memory, the result is sent in the format:
#CMGW:
where:
‐ message location index in the memory .
If message storing fails for some reason, an error code is reported.