Parameters and values, Notes – Synaccess Networks NP-0801DTM User Manual
Page 48
3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide
48
Parameters and Values
Data rate.
0
Autobauding. Automatic selection of the speed. Default: 0.
4
2400 bps (V.22bis).
5
2400 bps (V.26ter).
6
4800 bps (V.32).
7
9600 bps (V.32).
12
9600 bps (V.34).
14
14400 bps (V.34).
15
19200 bps (V.34).
16
28800 bps (V.34).
17
33600 bps (V.34).
68
2400 bps (V.110 or X.31 flag stuffing).
70
4800 bps (V.110 or X.31 flag stuffing).
71
9600 bps (V.110 or X.31 flag stuffing).
75
14400 bps (V110 or X.31 flag stuffing).
79
19200 bps (V.110 or X.31 flag stuffing).
80
28800 bps (V.110 or X.31 flag stuffing).
81
38400 bps (V.110 or X.31 flag stuffing).
82
48000 bps (V.110 or X.31 flag stuffing).
83
56000 bps (V.110 or X.31 flag stuffing).
84
64000 bps (X.31 flag stuffing).
115
56000 bps (bit transparent).
116
64000 bps (bit transparent).
120
32000 bps (PIAFS32k).
121
64000 bps (PIAFS64k).
130
28800 bps (multimedia).
131
32000 bps (multimedia).
132
33600 bps (multimedia).
133
56000 bps (multimedia).
134
64000 bps (multimedia).
Bearer service name.
0
Data circuit asynchronous. Default: 0.
1
Data circuit synchronous.
Connection element.
0
Transparent.
1
Non transparent. Default: 1.
Notes
The following settings are not supported:
AT+CBST=0,0,0
AT+CBST=14,0,0