Synaccess Networks NP-0801DTM - Manual (Page 304)

GPS AT COMMANDS SET
HSPA+ AT Commands Reference Guide 304
Syntax
Command Command type
AT$LCSLK=[,] Set
AT$LCSLK? Read
AT$LCSLK=? Test
Parameters and Values
0 Unlock the current cid available for LCS use.
1 Lock the specified cid to setup/release a control link for LCS use only.
PDP context identifier.
1‐5 Numeric parameter which specifies a particular PDP context definition.
Note: is mandatory if
is set to lock, otherwise omitted.