Serving cell information #servinfo, Gsm network, Umts network – Synaccess Networks NP-0801DTM User Manual
Page 166
CUSTOM AT COMMANDS
HSPA+ AT Commands Reference Guide
166
Serving Cell Information #SERVINFO
Execute command reports information about serving cell, in the format:
GSM network
#SERVINFO:
UMTS network
#SERVINFO:
where:
BCCH ARFCN of the serving cell.
Received signal strength in dBm.
Operator name, quoted string type.
Country code and operator code, hexadecimal representation.
Base Station Identification Code.
Localization Area Code.
Time Advance: it’s available only if a GSM or GPRS is running.
GPRS supported in the cell.
0
Not supported.
1
Supported.
The following information appears if GPRS is supported in the cell:
If PBCCH is supported by the cell, PBCCH ARFCN of the serving cell otherwise the
label “hopping” is printed.
Network Operation Mode
”I”
“II”
”III”
Routing Area Color Code
Priority Access Threshold
0
3‐6
UMTS ARFCN of the serving cell
Primary Synchronization Code
Discontinuous reception cycle length
Service Domain
0
No service
1
CS only
2
PS only
3
CS and PS
Received Signal Code Power in dBm
During a call, a SMS sending/receiving or a location update the value of
Test command tests for command existence.