Synaccess Networks NP-0801DTM - Manual (Page 149)

CUSTOM AT COMMANDS
149 HSPA+ AT Commands Reference Guide
GPRS related errors
224 MS requested detach
225 NWK requested detach
226 Unsuccessful attach cause NO SERVICE
227 Unsuccessful attach cause NO ACCESS
228 Unsuccessful attach cause GPRS SERVICE REFUSED
229 PDP deactivation requested by NWK
230 PDP deactivation cause LLC link activation Failed
231 PDP deactivation cause NWK reactivation with same TI
232 PDP deactivation cause GMM abort
233 PDP deactivation cause LLC or SNDCP failure
234 PDP unsuccessful activation cause GMM error
235 PDP unsuccessful activation cause NWK reject
236 PDP unsuccessful activation cause NO NSAPI available
237 PDP unsuccessful activation cause SM refuse
238 PDP unsuccessful activation cause MMI ignore
239 PDP unsuccessful activation cause Nb Max Session Reach
256 PDP unsuccessful activation cause wrong APN
257 PDP unsuccessful activation cause unknown PDP address or type
258 PDP unsuccessful activation cause service not supported
259 PDP unsuccessful activation cause QOS not accepted
260 PDP unsuccessful activation cause socket error
Other custom values
240 FDN is active and number is not in FDN
241 Call operation not allowed
252 Call barring on outgoing calls
253 Call barring on incoming calls
254 Call impossible
255 Lower layer failure
Test command returns OK result code.
Syntax
Command Command type
AT#CEER Execute
AT#CEER=? Test
Notes
„
Reference: GSM 04.08.
Extended Error Report for Network Reject Cause #CEERNET
Execute command causes the TA to return a numeric code in the format
#CEERNET: