Synaccess Networks NP-0801DTM - Manual (Page 64)

3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide 64
0 Disable.
1 Enable.
2 Query status.
3 Registration.
4 Erasure.
String type, phone number of forwarding address in format specified by
Type of address octet in integer format.
129 National numbering scheme.
145 International numbering scheme. Contains the character "+".
Sum of integers each representing a class of information to which the command
refers.
1 Voice (telephony).
2 Data.
4 Fax (facsimile services).
7 Voice + data + fax. Default: 7.
8 Short message service.
16 Data circuit sync.
32 Data circuit async.
64 Dedicated packet access.
128 Dedicated PAD access.
Time in seconds to wait before call is forwarded; it is valid only when
"no reply" is enabled (=1) or queried (=2)
1‐30 Automatically rounded to a multiple of 5 seconds. Default: 20.
Note: When =2 and command successful, it returns:
+CCFC: ,[,,[,,,]][
+CCFC: ,[,,[,,,]][ … ]]
where:
‐ current status of the network service
0 ‐ not active
1 ‐ active
‐ same as
‐ it is returned only when =2 (“no reply”) and =2.
The other parameters are described in the Parameters and Values section.
Notes
„
When querying the status of a network service (=2) the response line for 'not active' case (=0) is
returned only if service is not active for any .
„
Reference: 3GPP TS 27.007.