Synaccess Networks NP-0801DTM - Manual (Page 259)

ENHANCED IP STACK EXTENSIONAT COMMANDS
259 HSPA+ AT Commands Reference Guide
Socket Listen Ring Indicator #E2SLRI
Set command enables or disables the Ring Indicator pin response to a Socket Listen connect and, if enabled, the
duration of the negative going pulse generated on receipt of connect.
Read command reports whether the Ring Indicator pin response to a Socket Listen connect is currently enabled or
not, in the format:
#E2SLRI:
Test command returns the allowed values for parameter .
Syntax
Command Command type
AT#E2SLRI=[] Set
AT#E2SLRI? Read
AT#E2SLRI=? Test
Parameters and Values
Enable or disable RI.
RI disabled for Socket Listen connect. Default.
50‐1150 RI enabled for Socket Listen connect; a negative going pulse is generated on
receipt of connect and is the duration in ms of this pulse.
Firewall Setup #FRWL
Execute command controls the internal firewall settings.
Read command reports the list of all ACCEPT chain rules registered in the Firewall settings in the format:
#FRWL: ,
#FRWL: ,
….
OK
Test command returns the allowed values for parameter .
Syntax
Command Command type
AT#FRWL=[,,] Execute
AT#FRWL? Read
AT#FRWL=? Test
Parameters and Values
Command action.
0 Remove selected chain.
1 Add an ACCEPT chain.