Synaccess Networks NP-0801DTM - Manual (Page 116)

3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide 116
Parameters and Values
Numeric parameter that specifies a PDP context definition. See +CGDCONT. If no
is specified, the addresses for all defined contexts are returned.
String that identifies the terminal in the address space applicable to the PDP. The
address may be static or dynamic. For a static address, it is the one set by the
+CGDCONT command when the context was defined. For a dynamic address it is
the one assigned during the last PDP context activation that used the context
definition referred to by ; if no address is available the empty string (“”) is
represented as
Notes
„
Reference: 3GPP TS 27.007
Examples
AT#GPRS=1
+IP: xxx.yyy.zzz.www
OK
AT+CGPADDR=1
+CGPADDR: 1,”xxx.yyy.zzz.www”
OK
AT+CGPADDR=?
+CGPADDR: (1)
OK
Modify PDP Context +CGCMOD
The Execute command modifies the specified PDP context(s) with respect to QoS profiles.
If no i> is specified the command modifies all active contexts.
Test command returns a list of s associated with active contexts.
Syntax
Command Command type
AT+CGCMOD=[[,[,…,]]]
AT+CGCMOD=?
Parameters and Values
i> Numeric parameter which specifies a particular PDP context.