Synaccess Networks NP-0801DTM - Manual (Page 163)

CUSTOM AT COMMANDS
163 HSPA+ AT Commands Reference Guide
Execute command (AT#MONI) reports GSM/UMTS‐related information for selected cell and dedicated
channel (if exists).
If the last setting done by #MONI is in the range [0‐6], the output format is as follows:
„
When extracting data for the serving cell and the network name is known the format is:
GSM network
#MONI: BSIC: RxQual: LAC: Id: ARFCN: PWR: dBm TA:
UMTS network
#MONI: PSC: RSCP: LAC: Id:EcIo: UARFCN: PWR: dBm
DRX: SCR:
„
When the network name is unknown, the format is:
GSM network
#MONI: Cc: Nc: BSIC: RxQual: LAC: Id: ARFCN: PWR: dBm TA:
UMTS network
#MONI: Cc: Nc: PSC: RSCP: LAC:, Id: EcIo: UARFCN:
PWR: dBm DRX:SCR:
„
When extracting data for an adjacent cell, the format is:
GSM network
#MONI: Adj Cell [LAC: Id:] ARFCN: PWR: dBm
UMTS network
#MONI: PSC: RSCP: EcIo: UARFCN: SCR:
where:
Name of network operator.
Country code.
Network operator code.
Progressive number of adjacent cell.
Base station identification code.
Quality of reception.
0‐7
Localization area code.
Cell identifier.
Assigned radio channel
Received signal strength in dBm; for serving cell in UMTS network this is not
available during a call, and is displayed as 0.
Timing advance.
Primary synchronisation code.
Received Signal Code Power in dBm; for serving cell this is not available during a