Synaccess Networks NP-0801DTM - Manual (Page 28)

HAYES COMPLIANT AT COMMANDS
HSPA+ AT Commands Reference Guide 28
Capabilities List +GCAP
Execute command returns the equipment supported command set list.
Syntax
Command Command type
AT+GCAP Execute
Notes
„
Reference: V.25ter.
„
Response indicates:
ƒ +CGSM: GSM ETSI command set.
ƒ +DS: Data Service common modem command set.
ƒ +MS: Mobile Specific command set.
ƒ +ES: WCDMA data Service common modem command set.
ƒ +FCLASS: Fax class.
Serial Number +GSN
Execute command returns the device board serial number.
Syntax
Command Command type
AT+GSN Execute
Notes
„
The number returned is not the IMSI, it is only the board number.
„
Reference: V.25ter.
Display Configuration and Profile &V
Execute command returns some of the base configuration parameters settings.
Syntax
Command Command type
AT&V Execute
Notes
„
The row of information about CTS (C106) OPTIONS is in the output of &V only for compatibility reasons and
represents only a dummy value.
Display Configuration and Profile &V0
Execute command returns all the configuration parameters settings.
Syntax
Command Command type
AT&V0 Execute