Synaccess Networks NP-0801DTM - Manual (Page 82)

3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide 82
Read Phonebook Entries +CPBR
Execute command returns phonebook entries in location number range .. from the current
phonebook memory storage selected with +CPBS. If is omitted, only location is returned.
Test command returns the supported range of values for and the maximum lengths of and
fields, in the format:
+CPBR: ( ‐ ),,
where:
‐ the minimum number, integer type
‐ the maximum number, integer type
‐ maximum field length, integer type
‐ maximum field length, integer type
Note: The value of varies, depending on the availability of Extension service, in the following situations:
1. if “SM” memory storage is selected (see +CPBS) and the SIM supports the Extension1 service
2. if “FD” memory storage is selected (see +CPBS) and the SIM supports the Extension2 service
if “MB” memory storage is selected (see +CPBS) and the SIM supports the Extension6 service
Syntax
Command Command type
AT+CPBR=[,] Execute
AT+CPBR=? Test
Parameters and Values
Integer type, value in the range of location numbers of the currently selected
phonebook memory storage. See +CPBS.
Integer type, value in the range of location numbers of the currently selected
phonebook memory storage. See +CPBS.
The response format is:
[+CPBR: ,,,[
+CPBR: ,,,[…]]]
where:
‐ Location number of the phonebook entry
‐ String type, phone number of format
‐ Type of phone number octet in integer format
129 ‐ National numbering scheme
145 ‐ International numbering scheme. Contains the character "+".
‐ The alphanumeric text associated to the number. Used character set is
the one selected with command +CSCS.
Note: If “MC” is the currently selected phonebook memory storage, a sequence
of missed calls coming from the same number are saved as one missed call.
+CPBR shows one line of information.
Note: If all queried locations are empty (but available), no information text lines