Synaccess Networks NP-0801DTM - Manual (Page 300)

GPS AT COMMANDS SET
HSPA+ AT Commands Reference Guide 300
Update Terminal Information #LCSTER
Set command updates the terminal information like IMSI, MSISDN or IPv4 address.
Syntax
Command Command type
AT$LCSTER=[,[,[,]]] Set
Parameters and Values
A number.
0 MSIDSN.
1 IMSI.
2 IPv4 address.
3 Invalid.
A string, as defined in .
Preferred position mode.
0 Default position mode.
1 None preferred position mode.
Indicates if TLS mode is used by the SET.
0 Non‐TLS mode.
1 TLS mode. Default: 1.
Notes
„
If is MSISDN or IPv4 address then is entered.
Enable/Disable Unsolicited Response $LICLS
Set command enables or disables unsolicited $LICLS response.
Read command returns the current value of parameter .
Test command returns the range of values for parameter .
Syntax
Command Command type
AT$LICLS = Set
AT$LICLS? Read
AT$LICLS=? Test