Synaccess Networks NP-0801DTM - Manual (Page 127)

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
127 HSPA+ AT Commands Reference Guide
TEXT Mode
+CMT:,,[,<tooa>,<fo>,<pid>,<dcs>,
<sca>,<tosca>,<length>]
Italicized information depends on +CSDH last setting.
where:
‐ string type, originating address, converted in the currently selected
character set. See +CSCS.
‐ Alphanumeric representation of . +CSCS selects the character set
used.
‐ Arrival time of the message to the SC
, ‐ type of number or :
129 ‐ Number in national format
145 ‐ Number in international format. Contains the "+".
‐ First octet of 3GPP TS 23.040
‐ Protocol identifier
‐ Data coding scheme
‐ String type, service center address. Converted in the currently selected
character set. See +CSCS.
‐ Text length
‐ TP‐User‐Data
„
If indicates that GSM03.38 default alphabet is used and
indicates that GSM03.40 TP‐User‐Data‐Header‐Indication is not set
(bit 6 of is 0), each character of GSM alphabet is converted into
current TE character set. See +CSCS.
„
If indicates that 8‐bit or UCS2 data coding scheme is used or
indicates that GSM03.40 TP‐User‐Data‐Header‐Indication is set
(bit 6 of is 1), each 8‐bit octet is converted into two IRA
character long hexadecimal number (for example octet 0x2A is
converted as two characters 0x32 0x41)
Class 2 messages and messages in the “store” message waiting indication group
result in indication as defined in =1.
3 Class 3 SMS‐DELIVERs are routed directly to TE using unsolicited result codes defined
in =2. Messages of other data coding schemes result in indication as defined in
=1.
Broadcast reporting option.
0 Cell Broadcast Messages are not sent to the DTE
2 New Cell Broadcast Messages are sent to the DTE with the unsolicited result code:
PDU Mode
+CBM:
where:
‐ PDU length
‐ message PDU
TEXT Mode
+CBM:,,,,
where:
‐ message serial number
‐ message ID
‐ Data Coding Scheme