Synaccess Networks NP-0801DTM - Manual (Page 84)

3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide 84
Note: If no PB records satisfy the search criteria then an ERROR message is
reported.
Notes
„
Remember to select the PB storage with +CPBS command before issuing PB commands.
„
Reference: 3GPP TS 27.007.
Write Phonebook Entry +CPBW
Execute command writes phonebook entry in location number in the current phonebook memory storage
selected with +CPBS.
Test command returns location range supported by the current storage as a compound value, the maximum
length of field, supported number format of the storage and maximum length of field. The
format is:
+CPBW: (list of supported s),,
(list of supported s),
where:
‐ integer type value indicating the maximum length of field .
‐ integer type value indicating the maximum length of field
Note: The value of can vary, depending on the availability of Extension service, in the following
situations:
„
If “SM” memory storage is selected (see +CPBS) and the SIM supports the Extension1 service
„
If “FD” memory storage is selected (see +CPBS) and the SIM supports the Extension2 service if “MB” memory
storage is selected (see +CPBS) and the SIM supports the Extension6 service
Syntax
Command Command type
AT+CPBW=[][, [,[,]]] Execute
AT+CPBW=? Test
Parameters and Values
Integer type, value in the range of location numbers of the currently selected
phonebook memory storage. See +CPBS.
String type, phone number in the format .
Type of number.
129 National numbering scheme.
145 International numbering scheme. Contains the character "+".
String type, the text associated to the number. The used character set is the one
selected with command +CSCS.
Note : If record number already exists, it is overwritten.
Note : If either , and are omitted, the phonebook entry in location is
deleted.
Note : If is omitted or =0, the number is stored in the first free phonebook