Synaccess Networks NP-0801DTM - Manual (Page 85)

3GPP TS 27.007 AT COMMANDS
85 HSPA+ AT Commands Reference Guide
location. (example at+cpbw=0,"+390404192701",129,"Text" and at+cpbw=,"+390404192701",129,"Text")
Note : If either “LD”, “MC” or “RC” memory storage is selected (see +CPBS) it is possible just to delete the
phonebook entry in location , therefore parameters , and must be
omitted.
Notes
„
Before issuing PB commands, select the PB storage with +CPBS command.
„
Reference: 3GPP TS 27.007
Clock Management +CCLK
Set command sets the real‐time clock of the ME.
Read command returns the current setting of the real‐time clock, in the format .
Note: The three last characters of —that is, the time zone information—are returned by +CCLK? only if the
#NITZ URC ‘extended’ format is enabled. See #NITZ.
Test command returns the OK result code.
Syntax
Command Command type
AT+CCLK= Set
AT+CCLK? Read
AT+CCLK=? Test
Parameters and Values
Current time as quoted string in the format: "yy/MM/dd,hh:mm:ss±zz"
yy Year (two last digits are mandatory). Range is 00‐99.
MM Month (two last digits are mandatory). Range is 01‐12.
dd Day. Two last digits are mandatory.
The range for dd(day) depends on the month and year it refers to. Available
ranges are:
(01‐28)
(01‐29)
(01‐30)
(01‐31)
Trying to enter an out of range value raises an error.
hh Hour. Two last digits are mandatory. Range is 00‐23.
mm Minute. Two last digits are mandatory. Range is 00‐59.
ss Seconds. Two last digits are mandatory. Range is 00‐59.
±zz Time zone. Indicates the difference, expressed in quarter of an hour, between the
local time and GMT. Two last digits are mandatory. Range is ‐47‐+48.
Notes
„
Reference: 3GPP TS 27.007.