Synaccess Networks NP-0801DTM - Manual (Page 101)

3GPP TS 27.007 AT COMMANDS
101 HSPA+ AT Commands Reference Guide
Syntax
Command Command type
AT+CGEREP=[[,]] Set
AT+CGEREP? Read
AT+CGEREP=? Test
Parameters and Values
Controls the processing of URCs specified with this command.
0 Buffer unsolicited result codes in the TA. If TA result code buffer is full, the oldest one
can be discarded. No codes are forwarded to the TE.
1 Discard unsolicited result codes when TA‐TE link is reserved (for example in on‐line
data mode); otherwise forward them directly to the TE.
2 Buffer unsolicited result codes in the TA when TA‐TE link is reserved (for example in
on‐line data mode) and flush them to the TE when TA‐TE link becomes available;
otherwise forward them directly to the TE.
Controls the effect on buffered codes when 1 or 2 is entered:
0 TA buffer of unsolicited result codes defined within this command is cleared when
=1 or 2 is entered.
1 TA buffer of unsolicited result codes defined within this command is flushed to the TE
when =1 or 2 is entered. OK response is given before flushing codes.
Unsolicited Result Codes
The following unsolicited result codes and the corresponding events are defined:
„
+CGEV: REJECT ,
A network request for PDP context activation occurred when the TA was unable to report it to the TE with a
+CRING unsolicited result code and was automatically rejected.
„
+CGEV: NW REACT , , []
The network has requested a context reactivation. The that was used to reactivate the context is
provided if known to TA.
„
+CGEV: NW DEACT , , []
The network has forced a context deactivation. The that was used to activate the context is provided if
known to TA.
„
+CGEV: ME DEACT , , []
The mobile equipment has forced a context deactivation. The that was used to activate the context is
provided if known to TA.
„
+CGEV: NW DETACH
The network has forced a GPRS detach. This implies that all active contexts have been deactivated. These are
not reported separately.
„
+CGEV: ME DETACH
The mobile equipment has forced a GPRS detach. This implies that all active contexts have been deactivated.
These are not reported separately.
„
+CGEV: ME CLASS