Synaccess Networks NP-0801DTM - Manual (Page 325)

CME ERROR LIST
325 HSPA+ AT Commands Reference Guide
CME Error List
Mobile Equipment (ME) Error Result Code ‐ +CME ERROR:
+CME ERROR: is NOT a command. Rather, it is the error response to +Cxxx 3GPP TS 27.007 commands.
Syntax
Command Command type
+CME ERROR: This is not a command.
Parameters and Values
The error code can be numeric or verbose. See +CMEE.
Numeric format Verbose format
General errors
0 Phone failure.
1 No connection to phone.
2 Phone‐adaptor link reserved.
3 Operation not allowed.
4 Operation not supported.
5 PH‐SIM PIN required.
10 SIM not inserted.
11 SIM PIN required.
12 SIM PUK required.
13 SIM failure.
14 SIM busy.
15 SIM wrong.
16 Incorrect password.
17 SIM PIN2 required.
18 SIM PUK2 required.
20 Memory full.
21 Invalid index.
22 Not found.
23 Memory failure.
24 Text string too long.
25 Invalid characters in text string.
26 Dial string too long.
27 Invalid characters in dial string.
30 No network service.
31 Network time‐out.
32 Network not allowed ‐ emergency calls only.
40 Network personalization PIN required.
41 Network personalization PUK required.
42 Network subset personalization PIN required.