Synaccess Networks NP-0801DTM - Manual (Page 220)

CUSTOM AT COMMANDS
HSPA+ AT Commands Reference Guide 220
#SCFG: 4,1,300,90,600,50
#SCFG: 5,1,300,90,600,50
#SCFG: 6,1,300,90,600,50
OK
Socket Configuration Extended #SCFGEXT
Set command sets the socket configuration extended parameters
Read command returns the current socket extended configuration parameters values for all the six sockets, in the
format:
#SCFGEXT:, ,,,
,0
. . .
#SCFGEXT:, ,,,
,0
Test command returns the range of supported values for all the subparameters
Syntax
Command Command type
AT#SCFGEXT=,,,,
[, [,]] Set
AT#SCFGEXT? Read
AT#SCFGEXT=? Test
Parameters and Values
Socket connection identifier.
1‐6
SRing unsolicited mode.
0 Normal. Default: 0.
SRING : where is the socket connection identifier
1 Data amount.
SRING : , where is the amount of data received on the
socket connection number
2 Data view.
SRING : ,, same as before and is data received
displayed following value.
Data view mode for received data in command mode(AT#SRECV or = 2).
0 Text mode. Default: 0.
1 Hexadecimal mode.
Set the TCP Keepalive value in minutes.
0 Deactivated. Default: 0.