Synaccess Networks NP-0801DTM - Manual (Page 78)

3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide 78
0 No sound activity.
1 Some sound activity.
“message” Message received.
Message received indicator range.
0 No unread short message at memory location “SM”.
1 Unread short message at memory location “SM”.
“call” Call in progress.
Call in progress indicator range.
0 No calls in progress.
1 At least a call is established.
“roam” Roaming.
Roaming indicator range.
0 Registered to home network or not registered.
1 Registered to other network.
“smsfull” Short message memory storage in the MT is full (1), or memory locations are
available (0).
Short message memory storage indicator range.
0 Memory locations are available
1 Short message memory storage in the MT is full.
“rssi” Received signal (field) strength
Received signal strength level indicator range
0 Signal strength ≤ (‐112) dBm
1‐4 Signal strength in (‐97) dBm..(‐66) dBm (15 dBm steps)
5 Signal strength ≥ (‐51) dBm
99 Not measurable.
Syntax
Command Command type
AT+CIND=[[,[,…]]] Set
AT+CIND? Read
AT+CIND=? Test
Parameters and Values
Registration state.
0 The indicator is deregistered; there’s no unsolicited result code (+CIEV URC)
automatically sent by the ME to the application, whenever the value of the
associated indicator changes; the value can be directly queried with +CIND?
1 The indicator is registered. An unsolicited result code (+CIEV URC) is automatically
sent by the ME to the application, whenever the value of the associated indicator
changes; it is still possible to query the value through +CIND? Default: 1.
Note: When the ME is switched on all of the indicators are in registered mode.