Synaccess Networks NP-0801DTM - Manual (Page 51)

3GPP TS 27.007 AT COMMANDS
51 HSPA+ AT Commands Reference Guide
Notes
„
Reference: 3GPP TS 27.007, GSM 04.08.
Cellular Result Codes +CRC
Set command controls whether the extended format of incoming call indication is used.
Read command returns current value of the parameter .
Test command returns supported values of the parameter .
Syntax
Command Command type
AT+CRC=[] Set
AT+CRC? Read
AT+CRC=? Test
Parameters and Values
0 Disables extended format reporting. Default: 0.
1 Enables extended format reporting:
When enabled, an incoming call is indicated to the TE with unsolicited result code
+CRING:
instead of the normal RING.
where
‐ call type:
ASYNC ‐ asynchronous transparent data
SYNC ‐ synchronous transparent data
REL ASYNC ‐ asynchronous non‐transparent data
REL SYNC ‐ synchronous non‐transparent data
VOICE ‐ normal voice (TS 11)
Notes
„
Reference: 3GPP TS 27.007.
Voice Hung Up Control +CVHU
Set command selects whether ATH or "drop DTR" causes a voice connection to be disconnected.
Read command reports the current value of the parameter, in the format: +CVHU:
Test command reports the range of supported values for parameter .
Syntax
Command Command type
AT+CVHU=[] Set
AT+CVHU? Read
AT+CVHU=? Test