Synaccess Networks NP-0801DTM - Manual (Page 248)

FTP AT COMMANDS
HSPA+ AT Commands Reference Guide 248
FTP Append #FTPAPP
Execute command, issued during an FTP connection, opens a data connection and append data to existing
file.
If the data connection succeeds, a CONNECT indication is sent. Afterward a NO CARRIER indication is sent when
the socket is closed.
Test command reports the supported range of values for and .
Syntax
Command Command type
AT#FTPAPP=[[],] Execute
AT#FTPAPP=? Test
Parameters and Values
String type, name of the file.
0 Online mode.
1 Command mode.
Notes
„
If you set to 1, the data connection is opened, you remain in command mode and you see the
result code OK (instead of CONNECT).
„
Use the escape sequence +++ to close the data connection.
„
The command causes an ERROR result code to be returned if no FTP connection is opened yet.
Set Restart Position # FTPREST
Set command sets the restart position for successive FTPGET (or FTPGETPKT) command. It allows you to restart a
previously interrupted FTP download from the selected position in byte.
Read command returns the current
#FTPREST:
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPREST= Set command
AT#FTPREST? Read command
AT#FTPREST=? Test command
Parameters and Values
Position in byte of restarting for successive FTPGET (or FTPGETPKT).