Synaccess Networks NP-0801DTM - Manual (Page 123)

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
123 HSPA+ AT Commands Reference Guide
OK
Show Text Mode Parameters +CSDH
Set command controls whether detailed header information is shown in text mode (AT+CMGF=1) result codes.
Read command reports the current setting in the format:
+CSDH:
Test command reports the supported range of values for parameter .
Syntax
Command Command type
AT+CSDH=[] Set
AT+CSDH? Read
AT+CSDH=? Test
Parameters and Values
0 Do not show header values defined in commands +CSCA and +CSMP (,
, , , and ) nor , or in +CMT,
+CMGL, +CMGR result codes for SMS‐DELIVERs and SMS‐SUBMITs in text mode.
For SMS‐COMMANDs in +CMGR result code do not show , , ,
, or .
1 Show the values in result codes.
Notes
„
Reference: GSM 27.005.
Select Cell Broadcast +CSCB
Set command selects which types of Cell Broadcast Messages the device receives.
Read command reports the current value of parameters , and .
Test command returns the range of values for parameter .
Syntax
Command Command type
AT+CSCB=[[,[,]]] Set
AT+CSCB? Read
AT+CSCB=? Test
Parameters and Values
0 The message types defined by and are accepted. Default: 0.
1 The message types defined by and are rejected.
String type, message Identifiers: all different possible combinations of the CBM
message identifiers. Default: empty string (“”).
String type, Data Coding Schemes,: all different possible combinations of CBM