Synaccess Networks NP-0801DTM - Manual (Page 46)

3GPP TS 27.007 AT COMMANDS
HSPA+ AT Commands Reference Guide 46
International Mobile Subscriber Identity (IMSI) +CIMI
Execute command returns the value of the Internal Mobile Subscriber Identity stored in the SIM without
command echo.
Test command returns OK result code.
Syntax
Command Command type
AT+CIMI Execute
AT+CIMI=? Test
Notes
„
A SIM card must be present in the SIM card housing, otherwise the execute command returns ERROR.
„
Reference: 3GPP TS 27.007.
Multiplexing Mode +CMUX
Set command enables or disables the 3GPP TS 27.010 multiplexing protocol control channel.
Read command returns the current value of , , , , , , , and
parameters, in the format:
+CMUX: ,, , , , , , ,.
Test command returns the range of supported values for , , , , , ,
, and .
Syntax
Command Command type
AT+CMUX=[,[,[,[,[,[,[,
[,]]]]]]]] Set
AT+CMUX? Read
AT+CMUX=? Test
Parameters and Values
Multiplexer transparency mechanism.
0 Basic option. Currently the only supported value.
0 UIH frames used only; it is currently the only supported value.
Transmission rate.
5 115 200 bit/s. Default: 5.
Maximum frame size.
1‐1509 Default: 121.
Acknowledgement timer in units of ten milliseconds.
1‐255 Default: 10 (100 ms).
Maximum number of re‐transmissions.
0‐100 Currently only the range 0‐5 is supported. Default: 3.