Notes, Examples – Synaccess Networks NP-0801DTM User Manual
Page 37
HAYES COMPLIANT AT COMMANDS
37
HSPA+ AT Commands Reference Guide
FD ‐ SIM fixed dialing‐phonebook
LD ‐ SIM last‐dialing‐phonebook
MC ‐ device missed (unanswered received) calls list
RC ‐ ME received calls list
MB ‐ mailbox numbers stored on SIM, if this service is provided by
the SIM. See #MBN.
‐ entry location; Ensure it is in the range of locations available in
the memory used.
ATD>
Issues a call to phone number in entry location
phonebook memory storage. See +CPBS.
If “;” is present a voice call is performed.
‐ active phonebook memory storage entry location; it should be
in the range of locations available in the active phonebook memory
storage.
ATDL
Issues a call to the last number dialed.
ATDS=
Issues a call to the number stored in the module internal
phonebook position number
If “;” is present a voice call is performed.
‐ internal phonebook position to be called. See commands &N
and &Z.
ATD
ATD
Issues a call overwriting the CLIR supplementary service
subscription default value for this call
If “;” is present a voice call is performed.
I ‐ invocation, restrict CLI presentation
i ‐ suppression, allow CLI presentation
ATD
ATD
Issues a call checking the CUG supplementary service information
for the current call. Refer to +CCUG command.
If “;” is present a voice call is performed.
ATD*
[*
[*[
This command is specific of GPRS function and causes the MT to
perform whatever actions are necessary to establish
communication between the TE and the external PDN.
‐ GPRS Service Code, a digit string (value 99) that
identifies a request to use the GPRS
‐ string that identifies the called party in the address space
applicable to the PDP.
‐ a string that indicates the layer 2 protocol. For
communications software that does not support arbitrary
characters in the dial string, the following numeric equivalents are
used:
1 ‐ PPP
‐ Digit that specifies a particular PDP context definition. See
+CGDCONT.
Notes
Reference: V.25ter.
You can issue this command on a non voice device, however, the result is no carrier, because you are only able
to originate a voice call on data‐only devices.
Examples
To dial a number in SIM phonebook entry 6: