Synaccess Networks NP-0801DTM - Manual (Page 314)

AUDIO COMMANDS
HSPA+ AT Commands Reference Guide 314
Audio Profile Selection #PSEL
Set command selects the active audio profile.
The Read command returns the active profile in the format:
#PSEL:
Test command returns the supported range of values of parameter .
Syntax
Command Command type
AT#PSEL= Set
AT#PSEL? Read
AT#PSEL=? Test
Parameters and Values
Current profile.
0 Standard profile.
1‐3 Extended profile, modifiable.
Notes
„
To save value in non‐volatile memory, use the AT&W command.
Audio Filters
Uplink Path Biquad Filters #BIQUADIN
Set command allows to configure the parameters of the two cascaded digital biquad filters
) ( ) ( z H z H
Second First
⋅
in Uplink path (sending). It is not allowed if active audio profile is 0.
Read command returns the parameters for the active profile in the format:
#BIQUADIN: ,,,,,,,,,
It is not allowed if active audio profile is 0.
Test command returns the supported range of values for , , , , , , , ,
,
Syntax
Command Command type
AT# BIQUADIN=[,[,[,[,[,
[,[,[,[,]]]]]]]]] Set
AT# BIQUADIN? Read
AT# BIQUADIN=? Test