Synaccess Networks NP-0801DTM - Manual (Page 131)

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
131 HSPA+ AT Commands Reference Guide
Syntax
Command Command type
AT+CNMA Execute
AT+CNMA[=[,[PDU is given Execute
PDU mode
AT+CNMA Execute
Test mode
AT+CNMA=? Test
PDU mode
AT+CNMA=? Test
Text mode
Parameters and Values
For PDU mode, type of acknowledgement.
0 Send RP‐ACK without PDU (same as TEXT mode).
1 Send RP‐ACK with optional PDU message.
2 Send RP‐ERROR with optional PDU message.
Length of the PDU message.
Notes
„
If a directly routed message must be buffered in ME/TA (possible when +CNMI parameter equals 0 or 2)
or AT interpreter remains too long in a state where result codes cannot be sent to TE (for example user is
entering a message using +CMGS), acknowledgement (RP‐ACK) is sent to the network without waiting +CNMA
command from TE.
„
You may need to resolve an incoherence problem, due to the fact that it is possible to have contemporaneous
different settings of parameter and of the +CNMI command in different sessions. See #PORTCFG and
+CMUX. Only the and setting for session “0” are considered as valid to decide if +CNMA
acknowledgment is expected or not.
„
Reference 3GPP TS 27.005.
Examples
(PDU Mode)
AT+CSMS=1
+CSMS: 1,1,1
OK
Set PDU mode.
AT+CMGF=0
OK
AT+CNMI=2,2,0,0,0
OK