Synaccess Networks NP-0801DTM - Manual (Page 109)

3GPP TS 27.007 AT COMMANDS
109 HSPA+ AT Commands Reference Guide
SDU error ratio mEe mean m*10‐e , for example 1E2 mean 1*10‐
2.
“0E0” Default: “0E0”.
“1E1”
“1E2”
“7E3”
“1E3”
“1E4”
“1E5”
“1E6”
Residual bit error ratio ‐ mEe mean m*10‐e , for example 1E2
mean 1*10‐2
“0E0” Default: “0E0”.
“5E2”
“1E2”
“5E3”
“4E3”
“1E3”
“1E4”
“1E5”
“1E6”
“6E8”
Delivery of erroneous SDUs.
0 No
1 Yes
2 No detect.
3 Subscribed value. Default: 3.
Transfer delay (milliseconds)
0 Subscribed value. Default: 0.
10…150
200…950
1000…4000
Traffic handling priority.
0 Subscribed value. Default: 0.
1‐3
Characteristics of the source of the submitted SDUs for a PDP
context. Provide this parameter if the is specified
as conversational or streaming.
0 Characteristics of SDUs is unknown. Default: 0.
1 Characteristics of SDUs corresponds to a speech source
Signaling content of submitted SDUs for a PDP context. Provide
this parameter if the is specified as interactive.
0 PDP context is not optimized for signaling. Default: 0.
1 PDP context is optimized for signaling . See