Synaccess Networks NP-0801DTM - Manual (Page 198)

CUSTOM AT COMMANDS
HSPA+ AT Commands Reference Guide 198
1‐60 Default: 5.
Notes
„
The current settings are stored in non‐volatile memory.
„
The instance used for the SMS AT RUN service is the same used for the EvMoni service. Therefore, when the
#SMSATRUNCFG sets the parameter, the change is reflected also in the parameter of the
#ENAEVMONICFG command, and vice versa.
„
The set command returns ERROR if the command AT#ENAEVMONI? returns 1 as parameter or the
command AT#SMSATRUN? returns 1 as parameter.
SMS AT Run White List #SMSATWL
Set command to handle the white list.
Read command returns the list elements in the format:
#SMSATWL: [,]
Test command returns the supported values for the parameter , and
Syntax
Command Command type
AT#SMSATWL=,[,[,]] Set
AT#SMSATWL? Read
AT#SMSATWL=? Test
Parameters and Values
0 Add an entry to the white list.
1 Delete an entry from the white list.
2 Display an entry of the white list.
Index of the white list. Range 1‐8.
< entryType > Note: A maxiimum of two passwords can be specified in the white list.
0 Phone number.
1 Password.
String parameter enclosed between double quotes containing or the phone
number or the password.
Phone number contains numerical characters and the character “+” at the
beginning of the string and the character “*” at the end of the string.
Password must be exactly 16 characters length.
Note: When the character “*” is used, it means that all the numbers that begin
with the defined digit are part of the white list.
For example:
“+39*” All Italian users can ask to run AT command via SMS.
“+39349*” All Vodafone users can ask to run AT command via SMS.