Synaccess Networks NP-0801DTM - Manual (Page 168)

CUSTOM AT COMMANDS
HSPA+ AT Commands Reference Guide 168
Country code and operator code(MCC, MNC)
UMTS assigned radio channel
Active PSC (primary synchronization code)
Active Ec/Io (chip energy per total wideband power in dBm)
Active RSCP (Received Signal Code Power in dBm)
Received Signal Strength Indication
Localization area code
Routing area code
Tx power
Discontinuous reception cycle length (cycle length in ms)
Mobility Management state
Radio Resource state
Network Operator Mode
Block Error Rate. For example, 005 means 0.5 %.
Cell ID
International Mobile Station ID
Operator name
Service Domain
0 No service
1 CS only
2 PS only
3 CS and PS
Number of Active Set. Maximum is 6.
UARFCN of nth active set.
PSC of nth active set.
Ec/Io of nth active set.
Test command tests for command existence.