Synaccess Networks NP-0801DTM - Manual (Page 118)

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
HSPA+ AT Commands Reference Guide 118
Preferred Message Storage +CPMS
Set command selects memory storages , and to be used for reading, writing, sending
and storing SMS messages.
Read command reports the message storage status in the format:
+CPMS: ,,,,,,,,
where , and are the selected storage memories for reading, writing and storing
respectively.
Test command reports the supported values for , and .
Syntax
Command Command type
AT+CPMS=[,[,]]
AT+CPMS? Read
AT+CPMS=?
Parameters and Values
Memory from which messages are read and deleted.
“ SM ” SIM SMS memory storage.
Memory to which writing and sending operations are made.
“SM” SIM SMS memory storage.
Memory to which received SMs are preferred to be stored.
“SM” SIM SMS memory storage.
The command returns the memory storage status in the format:
+CPMS: ,,,,,
where:
‐ number of SMs stored into .
‐ maximum number of SMs that can contain.
‐ number of SMs stored into .
maximum number of SMs that can contain.
‐ number of SMs stored into .
‐ maximum number of SMs that can contain.
Notes
„
The only supported memory storage for reading, writing and sending SMs is the SIM internal memory "SM":
==="SM".
„
Reference: GSM 27.005
Examples
AT+CPMS?
+CPMS: "SM",5,10,"SM",5,10,"SM",5,10
OK
5 out of 10 SMS SIM positions occupied.