Synaccess Networks NP-0801DTM - Manual (Page 169)

CUSTOM AT COMMANDS
169 HSPA+ AT Commands Reference Guide
Syntax
Command Command type
AT#RFSTS
AT#RFSTS=? Test
Query SIM Status #QSS
Set command enables or disables the Query SIM Status unsolicited indication in the ME.
Read command reports whether the unsolicited indication #QSS is currently enabled or not, along with the SIM
status, in the format:
#QSS: ,
The sections that follow describe and .
Test command returns the supported range of values for parameter .
Syntax
Command Command type
AT#QSS=[] Set
AT#QSS? Read
AT#QSS=? Test
Parameters and Values
Type of notification.
0 Disabled. You can only query the current SIM status through Read command
AT#QSS?. Default: 0.
1 Enabled. The ME informs at every SIM status change through the following basic
unsolicited indication:
#QSS:
where:
‐ current SIM status
0 ‐ SIM NOT INSERTED
1 ‐ SIM INSERTED
2 Enabled. The ME informs at every SIM status change through the following
unsolicited indication:
#QSS:
where:
‐ current SIM status
0 ‐ SIM NOT INSERTED
1 ‐ SIM INSERTED
2 ‐ SIM INSERTED and PIN UNLOCKED
3 ‐ SIM INSERTED and READY. SMS and Phonebook access are possible.
Note: The command reports the SIM status change after the is set to 2. It
is recommended to set =2 and save the value in the user profile, then
power off the module. The proper SIM status is available at the next power on.
Delete All Phonebook Entries #CPBD
Execute command deletes all phonebook entries in the current phonebook memory storage selected with +CPBS.