Synaccess Networks NP-0801DTM - Manual (Page 292)

GPS AT COMMANDS SET
HSPA+ AT Commands Reference Guide 292
Examples
Sets the GSA as available sentence in the unsolicited message
AT$GPSNMUN=1,0,0,1,0,0,0
OK
Turn‐off the unsolicited mode
AT$GPSNMUN=0
OK
Give the current frame selected (GSA)
AT$GPSNMUN?
$GPSNMUN: 1,0,0,1,0,0,0
OK
The unsolicited message is:
$GPSNMUN:
$GPGSA,A,3,23,20,24,07,13,04,02,,,,,,2.4,1.6,1.8*3C
Get Acquired Position $GPSACP
Execute command returns information about the last GPS position in the format:
$GPSACP: ,,,,,,,,,,
See the Parameters and Values section for a description of these formats.
Read command supplies the same information as the Execute command.
Test command returns the OK result code.
Syntax
Command Command type
AT$GPSACP Execute
AT$GPSACP? Read
AT$GPSACP=? Test