Synaccess Networks NP-0801DTM - Manual (Page 83)

3GPP TS 27.007 AT COMMANDS
83 HSPA+ AT Commands Reference Guide
are returned, while if listing fails in an ME error, +CME ERROR: is returned.
Notes
„
Before issuing PB commands, select the PB storage with +CPBS command.
„
Reference: 3GPP TS 27.007.
Find Phonebook Entries +CPBF
Execute command returns phonebook entries (from the current phonebook memory storage selected with +CPBS)
which alphanumeric field start with string .
Test command reports the maximum lengths of and fields, in the format:
+CPBF: [],[]
where:
‐ maximum length of field , integer type
‐ maximum length of field , integer type
The value of can vary, depending on the availability of Extension service, in the following situations:
If “SM” memory storage is selected (see +CPBS) and the SIM supports the Extension1 service
if “FD” memory storage is selected (see +CPBS) and the SIM supports the Extension2 service
if “MB” memory storage is selected (see +CPBS) and the SIM supports the Extension6 service
Syntax
Command Command type
AT+CPBF= Execute
AT+CPBF=? Test
Parameters and Values
String type. The command +CSCS selects the character set used.
The command returns a report in the form:
[+CPBF: ,,,[
+CPBF: ,,,[…]]]
where:
‐ the location number of the phonebook entry
‐ String type, phone number of format .
‐ type of phone number octet in integer format
129 ‐ National numbering scheme
145 ‐ International numbering scheme. Contains the character "+".
‐ the alphanumeric text associated to the number; used character set is the
one selected with command +CSCS.
Note: +CPBF is not applicable if the current selected storage (see +CPBS) is either
“MC”, either “RC” or “LD”.
Note: If =”” the command returns all the phonebook records.