Synaccess Networks NP-0801DTM - Manual (Page 173)

CUSTOM AT COMMANDS
173 HSPA+ AT Commands Reference Guide
5 ‐ waiting (MT)
6 ‐ alerting (MT)
7 ‐ busy
‐ call type
1 ‐ voice
2 ‐ data
‐ called number (valid only for =1)
‐ type of
129 ‐ National number
145 ‐ International number
Note: The unsolicited indication is sent along with usual codes (OK, NO CARRIER,
BUSY...)
SMS Overflow #SMOV
Set command enables or disables the SMS overflow signaling function.
Read command reports whether the SMS overflow signaling function is currently enabled or not, in the format:
#SMOV:
Test command returns the supported range of values of parameter .
Syntax
Command Command type
AT#SMOV=[] Set
AT#SMOV? Read
AT#SMOV=? Test
Parameters and Values
0 Disables SMS overflow signaling function. Default: 0.
1 Enables SMS overflow signaling function; when the maximum storage capacity
is reached, the following network initiated notification is sent:
#SMOV:
is a string—“SM” for SIM memory—indicating the SMS storage that
has reached maximum capacity.
Mailbox Numbers #MBN
Execute command returns the mailbox numbers stored on SIM, if this service is provided by the SIM.
The response format is:
[#MBN: ,,[,][,mboxtype][
#MBN: ,,[,][,mboxtype][…]]]
where: