Synaccess Networks NP-0801DTM - Manual (Page 322)

AUDIO COMMANDS
HSPA+ AT Commands Reference Guide 322
#DVICFG: ,,< samplewidth >,,
Test command reports the range of supported values for:
,,< samplewidth >,,
Syntax
Command Command type
AT#DVIEXT=,[,[,[,>,[]]]] Set
AT#DVIEXT? Read
AT#DVIEXT=? Test
Parameters and Values
0 Burst mode.
1 Normal mode. Default: 1.
0 Audio scheduler sample rate 8KHz. Default: 1.
1 Audio scheduler sample rate 16KHz.
0 16 bits per sample. Default: 0.
1 18 bits per sample.
2 20 bits per sample.
3 24 bits per sample.
4 32 bits per sample.
0 Mono mode.
1 Dual mono. Default: 1.
0 Data bit is transmitted on falling edge of clock and sampled on rising edge of
clock. Default: 0.
1 Data bit is transmitted on rising edge of clock and sampled on falling edge of
clock.
Values for are valid only in Burst Mode. Normal Mode is 0.