Synaccess Networks NP-0801DTM - Manual (Page 129)

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
129 HSPA+ AT Commands Reference Guide
„
Use the following table to resolve incoherence problems, due to the possibility that the parameter can
have different settings at the same time, in different sessions. See #PORTCFG and +CMUX.
Message class or indication group, as in the DCS
SM class is no class
or
SM class is 0 or 1 or 3
or
SM is an Indication with group
“Discard”
SM class is 3.
settings in different sessions
=2 for session “0”
and
=anyvalue for other session(s)
URC is shown only on session 0.
=3 for session “0”
and
=0 or 1 for other session(s)
URC is shown only
on session 0.
„
The following table clarifies which URC is shown and if the DELIVER SM is stored, depending on the
parameter value and the SM class.
SM CLASS
0 / msg waiting
discard 1 / no class 2 3 msg waiting
store
0 Store in Store in
Store in SIM Store in
Store in
1 Store in ‐
Send ind +CMTI Store in
‐
Send ind
+CMTI Store in SIM ‐
Send ind
+CMTI Store in
‐
Send ind
+CMTI Store in ‐
Send ind +CMTI
2 Route msg to TE:
+CMT
See **Note. Route msg to
TE:
+CMT Store in SIM ‐
Send ind
+CMTI Route msg to
TE:
+CMT Store in ‐
Send ind +CMTI
3 Store in ‐
Send ind +CMTI Store in
‐ Send
ind +CMTI Store in SIM ‐
Send ind
+CMTI Route msg to
TE:
+CMT Store in ‐
Send ind +CMTI
where is the memory where the received messages are stored. See +CPMS.
**Note: The SM is not stored.
„