Synaccess Networks NP-0801DTM - Manual (Page 103)

3GPP TS 27.007 AT COMMANDS
103 HSPA+ AT Commands Reference Guide
Registration status.
Location area code in hexadecimal format. For example "00C3" equals 195 in
decimal.
Cell ID in hexadecimal format.
Access technology of the registered network:
0 GSM
2 UTRAN
String type, one byte routing area code in hexadecimal format.
Note: , , and are reported only if =2 and the mobile is registered on some network
cell.
Notes
„
Reference: 3GPP TS 27.007.
Define PDP Context +CGDCONT
Set command specifies PDP context parameter values for a PDP context identified by the (local) context
identification parameter, .
Read command returns the current settings for each defined context in the format:
+CGDCONT: ,,,,,
[,[,…[,pdN]]][+CGDCONT: ,
,,,,
[,[,…[,pdN]]][…]]
Test command returns values supported as a compound value.
Syntax
Command Command type
AT+CGDCONT=[[,[,[,[,
[,[,[,…[,pdN]]]]]]]]]
AT+CGDCONT? Read
AT+CGDCONT=?
Parameters and Values
PDP Context Identifier. Numeric parameter that specifies a PDP context
definition.
1‐max The value of max is returned by the Test command.
Note : A special form of the Set command, +CGDCONT=, causes the values
for context number to become undefined.
Packet Data Protocol type. String parameter that specifies the type of packet data
protocol
"IP" Internet Protocol
Access Point Name. String parameter that is a logical name used to select the
GGSN or the external packet data network. If the value is empty (“”) or omitted,