Synaccess Networks NP-0801DTM - Manual (Page 210)

CUSTOM AT COMMANDS
HSPA+ AT Commands Reference Guide 210
Parameters and Values for Text Mode
String type, destination address represented in the currently selected character set.
See +CSCS.
Text to send.
Enclose entered text between double quotes. Format text as follows:
„
If current indicates that GSM03.38 default alphabet is used and
current indicates that 3GPP TS 23.040 TP‐User‐Data‐Header‐
Indication is not set, then ME/TA converts the entered text into GSM
alphabet, according to GSM 27.005, Annex A. For more information
about and , see +CSMP.
„
If current indicates that 8‐bit or UCS2 data coding scheme is
used or current indicates that 3GPP TS 23.040 TP‐User‐Data‐
Header‐Indication is set. For more information about and ,
see +CSMP.
Entered text consists of two IRA character long hexadecimal
numbers which ME/TA converts into 8‐bit octet. For example the
‘asterisk’ is entered as 2A (IRA50 and IRA65) and this is converted
to an octet with integer value 0x2A.
If message is successfully sent to the network, then the result is sent in the format:
#CMGS:
where
‐ message reference number; 3GPP TS 23.040 TP‐Message‐Reference in integer
format.
Note: If message sending fails, an error code is reported.
Notes
„
To avoid malfunctions, wait for the #CMGS: or #CMS ERROR: response before issuing further
commands.
„
Reference: GSM 27.005.
Examples
SMS text mode example
AT+CMGF=1
AT#CMGS=6125553333, "this is my message"
#CMGS: 2
OK
SMS PDU mode example
AT+CMGF=0
AT#CMGS=30,07913121139418F011000A9155454433330000AA13C27A1EC47EDF59A06999CD0621D367740
8
#CMGS: 3
OK