Synaccess Networks NP-0801DTM - Manual (Page 243)

FTP AT COMMANDS
243 HSPA+ AT Commands Reference Guide
FTP Close #FTPCLOSE
Execute command closes an FTP connection.
Test command returns the OK result code.
Syntax
Command Command type
AT#FTPCLOSE Execute
AT#FTPCLOSE=? Test
FTP Put #FTPPUT
Execute command, issued during an FTP connection, opens a data connection and starts sending file to
the FTP server. If the data connection succeeds, a CONNECT indication is sent. When the socket is closed, a NO
CARRIER indication is sent.
Test command reports the supported range of values for and .
Syntax
Command Command type
AT#FTPPUT=[[],[]] Execute
AT#FTPPUT=? Test
Parameters and Values
String type, name of the file. Maximum length 200 characters.
0 Online mode.
1 Command mode.
Notes
„
To close the data connection, use the escape sequence +++.
„
If no FTP connection is open, the command returns an ERROR result code.
„
If you set to 1, the data connection is opened. You remain in command mode and see the result
code OK, instead of CONNECT.