Synaccess Networks NP-0801DTM - Manual (Page 117)

3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS
117 HSPA+ AT Commands Reference Guide
3GPP TS 27.005 AT Commands for SMS and CBS
General Configuration
Select Message Service +CSMS
Set command selects messaging service . It returns the types of messages supported by the ME:
Read command reports current service setting along with supported message types in the format:
+CSMS: ,,,
where:
Messaging service.
Mobile terminated messages support.
Mobile originated messages support.
Broadcast type messages support.
For more information about these values, see the Values section for the set command.
Test command reports the supported value of the parameter .
Syntax
Command Command type
AT+CSMS= Set
AT+CSMS? Read
AT+CSMS=? Test
Parameters and Values
0 3GPP TS 23.040 and 3GPP TS 23.041. The syntax of SMS AT commands is
compatible with 3GPP TS 27.005 Default: 0.
1 3GPP TS 23.040 and 3GPP TS 23.041. The syntax of SMS AT commands is
compatible with 3GPP TS 27.005. The requirement of setting 1 is
mentioned under corresponding command descriptions.
Set command returns the types of messages supported by the ME:
+CSMS: ,,
where:
‐ mobile terminated messages support
0 ‐ type not supported
1 ‐ type supported
‐ mobile originated messages support
0 ‐ type not supported
1 ‐ type supported
‐ broadcast type messages support
0 ‐ type not supported
1 ‐ type supported
Notes
„
Reference: 3GPP TS 27.005; 3GPP TS 23.040; 3GPP TS 23.041.