Synaccess Networks NP-0801DTM - Manual (Page 298)

GPS AT COMMANDS SET
HSPA+ AT Commands Reference Guide 298
0‐255 255 indicates that this parameter is not used.
Note: is mandatory with A‐GPS.
0 FALSE: display user name at the external client. Default: 0.
1 TRUE: display user name as anonymous at the external client.
Notes
„
The current setting is stored through $GPSSAV.
Examples
AT$GPSSLSR= 2,3,,,,,1
OK
GPS Stop Location Service Request $GPSSTOP
Command stops the Receiver in Autonomous or A‐GPS mode initiated through $GPSSLSR set command.
Syntax
Command Command type
$GPSSTOP=[]
$GPSSTOP=? Test
Parameters and Values
0 User denies request.
1 Unspecified cause for abort. Default: 1.
2 Cause invalid.
Notes
„
The current setting is stored through $GPSSAV.
Examples
AT$GPSSTOP
OK