Synaccess Networks NP-0801DTM - Manual (Page 250)

FTP AT COMMANDS
HSPA+ AT Commands Reference Guide 250
FTP Append #FTPAPP
Execute command, issued during an FTP connection, opens a data connection and append data to existing
file. If the data connection succeeds, a CONNECT indication is sent, afterward a NO CARRIER indication
is sent when the socket is closed.
Test command reports the supported range of values for and .
Syntax
Command Command type
AT#FTPAPP=[[],] Execute
AT#FTPAPP=? Test
Parameters and Values
String type, name of the file.
0 Online mode.
1 Command mode.
Notes
„
If you set to 1, the data connection is opened. You remain in command mode and see the result
code OK, instead of CONNECT.
„
Use the escape sequence +++ to close the data connection.
„
The command causes an ERROR result code to be returned if no FTP connection is opened yet.
Examples
AT#FTPRECV?
#FTPRECV: 3000
OK
Read required part of the buffered data:
AT#FTPRECV=400
#FTPRECV: 400
Text row number 1 * 1111111111111111111111111 *
Text row number 2 * 2222222222222222222222222 *
Text row number 3 * 3333333333333333333333333 *
Text row number 4 * 4444444444444444444444444 *
Text row number 5 * 5555555555555555555555555 *
Text row number 6 * 6666666666666666666666666 *
Text row number 7 * 7777777777777777777777777 *