Synaccess Networks NP-0801DTM - Manual (Page 213)

CUSTOM AT COMMANDS
213 HSPA+ AT Commands Reference Guide
Multisocket AT Commands
Socket Status #SS
Execute command reports the current status of the socket.
Test command reports the range for parameter .
Syntax
Command Command type
AT#SS[=] Execute
AT#SS=? Test
Parameters and Values
Socket connection identifier.
1‐6
The response format is:
#SS: ,,,,,
where:
Socket connection identifier.
Actual state of the socket.
0 Socket closed.
1 Socket with an active data transfer connection.
2 Socket suspended.
3 Socket suspended with pending data.
4 Socket listening.
5 Socket with an incoming connection. Waiting for the user accept or shutdown
command.
IP address associated by the context activation to the socket.
If the socket is placed in listen mode, the listening port.
If the socket is used to connect to a remote machine, the local port for the
connection.
When connected to a remote machine, this is the remote IP address.
The port connected to on the remote machine.
Notes
„
Issuing #SS causes getting information about status of all the sockets; the response format is:
#SS: ,,,,,
…
#SS: ,,,,,
Examples
AT#SS
#SS: 1,3,91.80.90.162,61119,88.37.127.146,10510