Spectra Precision FAST Survey Reference Manual - Manual (Page 79)

p77
 Port Number
: You must select the COM port to use. This is the COM port of the data collector.
 Instrument (Bluetooth):
FAST Survey can use Bluetooth to communicate only with instruments that have
Bluetooth incorporated on them. The Instrument name is displayed when a Bluetooth connection is
made.
 Baud Rate
: Baud rate for data transfer by serial cable or radio.
 Parity
: Parity setting is None, Odd or Even.
 Data Bits
: You must select the character length setting.
 Stop Bits
: You must select the stop bits setting.
 Defaults:
Clicking Defaults will utilize the standard default settings for the configured instrument.
Bluetooth Wireless
Bluetooth is automatically detected on the Windows Mobile data collector, if available. The com port settings to use
Bluetooth vary from unit to unit. For example, Com 3 is typical for the Compaq Ipaq and Com 5 is typical for the
Topcon FC1000, though it may use any of Com 4, 5 or 6. On the Allegro, the Bluetooth port is typically Com 4, 5, 8 or
9. The Bluetooth serial com port settings can be found in the “My Bluetooth Device” menu selection.
Settings/Search Tabs
 EDM Mode:
Options may vary by equipment. On the Leica 1200 total stations, for example, available methods