Spectra Precision FAST Survey Reference Manual User Manual
Page 67
p65
Even though point 79 was the newly measured point, point 14 is auto-updated to include BLD ST FL1 ST (start
building, the original code and start fence line, the new code). The Line Details process therefore saves field
measurement time and field coding time. Line Details, like Point Details, is a transparent or "context-sensitive"
command. Simply pick the line or point, without issuing any command, and the options appear. If you do so within the
Store Points "context", additional prompting occurs as discussed above. This also applies to Point Details, as described
below.
When conducting Store Points and using Field Codes, the picking of a point on the screen, in this context, allows for the
re-measuring of the point, to correct the field-to-finish linework and symbol placement. (Even if field codes are not
being used, picking any point within Store Points allows for re-measurement of the point.) So in the example above,
picking point 79 leads to the screen shown below, and the new result if re-surveyed. The original field code will be the
default description, but you have the option to change it.
The result of the new measurement is shown below: