Spectra Precision FAST Survey Reference Manual - Manual (Page 237)

p235
2-slope (pavement and shoulder) road. The last slope in each column acts as the "pivot point" for the slope stake
calculation. The fill slope is set at 4:1 and the cut slope at 3:1.
Using this template, cut slopes on the left side of the road will find the pivot at the base of ditch, while fill slopes on the
right side of the road will pivot from the edge of shoulder.
Draw Template
The Draw Template command will draw the selected template on the screen. All the zooming commands [Zoom In,
Zoom Out, Zoom Window, Zoom Previous and Pan] are available to you in the Draw Template command. Tap the
Menu
button to exit this command. The figure below illustrates this command using the “demo.tpl” template.