Spectra Precision FAST Survey Reference Manual - Manual (Page 187)

p185
Take Readings
Once the foresight points have been specified, the next dialog will be determined by the set order. If the next reading
was to be FD, since the BD was already recorded, then the dialog will prompt as shown below. Pay attention to the
prompts in these dialogs as they inform you as to which point and which face is expected based on your configured set
order. Press the Enter button or select the OK button to record the reading.
Reading Review
Unless robotic sets are involved, after each measurement an optional Reading Review dialog appears where the
measurement can be accepted or rejected. This option is set in Configure.