Spectra Precision FAST Survey Reference Manual - Manual (Page 360)

p358
 EDM Mode:
Allows you to specify the EDM measurement setting as one of the following types:
Standard
: Standard EDM mode.
Fast
: Fast Standard EDM mode.
Reflectorless:
Reflectorless EDM mode (DR Models).
 Turn to point in stakeout
: Turns the instrument to the horizontal angle as computed to the stakeout location
specified.
 Turn to vert. point in stakeout
: Turns the instrument to the vertical angle as computed to the stakeout location
specified. This option is not typically used unless a true elevation is known for the stakeout location specified.
Settings/Search/Remote (Direct Robotic)
This mode works exactly as the GeoRadio mode except a cable must be used in lieu of the radio. For this mode,the
instrument must be robotic and be operating in the Remote mode with the faceplate removed.
 EDM Mode:
This selection allows the user to specify the EDM measurement setting as one of the following types:
Standard
: Standard EDM mode.
Fast
: Fast Standard EDM mode.
Reflectorless:
Reflectorless EDM mode (DR Models).
 Guide Lights:
This sets the track lights to one of the following options:
Off:
Turns off the track lights.
Low:
Turns on the track lights on low power.
High:
Turns of the track lights on high power.
 Allow Weak Signal:
This will allow the instrument to return a distance when the signal is weak.
 Always Initialize Compensator:
This will reset the compensator every time the instrument is restarted.