Transformation – Spectra Precision FAST Survey Reference Manual User Manual
Page 215
p213
The description is fixed as the station and offset, but can be edited using the command Keyboard Input or File, Points.
The "Interval" option is not typically applied, unless Store Multiple is selected, in which case points will be stored
sequentially at the entered offset from the starting station to the ending station as entered. In addition to calculating a
station and offset perpendicular left and right, skewed pipes can be calculated by selecting the "skew back" or "skew
ahead" options in the pulldown list where "offset" is the default. A zero skew pipe is perpendicular to the horizontal
alignment. So a "skew ahead" of 20 degrees would be 20 degrees "ahead" of the 90 degree offset, or 70 degrees to the
right of the forward tangent. Here is an example where both ends of a pipe are calculated, with the resulting graphic
shown below. Decimal places on the stationing are set under File, Job Settings, Format Tab, Station Display.
Transformation